background image

User Manual

Multi-Card Technology Reader - 13.56MHz, DesFire EV1 / EV2 and EM / HID

4

1.3 Specification

1.4 Mounting

1.  Install the metal plate on the wall with two or four screws, which depends on different 

kinds of gang box being installed (1). 

2.  The cover shall clip on the upper edge (2) the push in the bottom part as show in 

diagram (3). 

3.  Tighten the secure non-dropout screw, which located underneath of the reader to fix 

the reader and the back plate (4), installation is completed.

Re-configure Window

5 seconds (Default) or Half an hour after power up

Reader Output Format

CSN/UID 32bits, 34bits, 56bits (backward/forward), file 

content reading for programmed ID

Wiegand Plus Width

Different choices to fit with different controller’s requirements

Buzzer Control

Reader & controller control (Default) or controller control only

LED/Back Lit Control

Define different LED colour response base on LED input

Typical Read Range

2 – 3 cm

Reader Standard Output

Wiegand (RS232 & RS485 (OSDP) (optional)

Wiring Distance

150m (22 AWG with shielded cable)

Operating Voltage

DC10 – 15V

Operating Current

150mA (max)

Operating Temperature

-30°C – 70°C

Operating Humidity

10% – 90%

Dimensions

115.5 x 84.5 x 20.5mm

Weight

210g

Reviews: