BDVR Manual
59
Version 1.2
2. Log List Search/Alarm, Motion Search
The Log Lists can be used to search and review recorded data from a given point in time.
Alarm, Motion, Video Loss and System related logs can be searched and played back
directly from the time of the incident.
１
.
To start an Event Search, press the
[Log]
button on the IR Remote and the
Log List Menu pops up, as shown below.
MENU TAB
CONDITION
ALL
y
Is a list of all the events since the initial power on procedure of the DVR
SYSTEM
y
Shows Events except for Alarm, Motion, and Video Loss.
NETWORK
y
Shows the NETWORK List.
ALARM
y
Displays all the Alarms Logged.
MOTION
y
Shows the Motion Log List.
VIDEO LOSS
y
Displays the Video Loss Log List.
2. Use the Up/Down buttons [
TS
] to move to the “Time” to playback. Use the Left/Right
buttons [
WX
] to move to the NEXT page.
3. Press the
[ENTER]
button to start playback.
Note:
Log List is saved on HDD.
Note:
To save the log, plug a USB memory stick into the USB port on the front panel.
Press the Display button on each category to backup Log data. Blue USB Icon flashes.
