2
Genie AWP Super Series
Part No. 37168
Operator’s Manual
First Edition • Ninth Printing
Tip-over Hazards
Do not raise the platform unless the base is level,
all four outriggers are properly installed and the
leveling jacks firmly contact the floor.
Do not adjust or remove the outriggers while the
platform is occupied or raised.
Do not move the machine while the platform is
raised.
Do not place ladders or scaffolds in the platform or
against any part of this machine.
Do not place or attach overhanging loads to any
part of this machine.
Do not raise the platform unless the machine is
level. Do not set the machine up on a surface
where it cannot be leveled using only the leveling
jacks. Do not use chocks, blocks or shims of any
kind to level the machine
.
Do not cause a horizontal force or side load to the
machine by raising or lowering a fixed or
overhanging load.
Do not push off or pull
toward any object outside
the platform.
Maximum allowable
manual force
45 lbs
200 N
Do not use the machine on a moving or mobile
surface or vehicle.
SAFETY RULES