Digital Day/Night Vandal Resistant Dome Camera
12
Installation
CONDUIT
ENTRY
RUBBER
GASKET
BASE
HOUSING
No. 8-32
UNC
DECORATION
RING
M4*10
DOME COVER
13
Digital Day/Night Vandal Resistant Dome Camera
Cable Connections
1. Dome Base Mounting
- Open the dome cover by loosening the 3 screws, using the special
wrench provided.
- Mount the base of the camera to a sturdy surface using the 4 screws
(1.5 inch) and the 4 pre-made holes on the base of the dome.
2. Power Connect & Monitor Impedance
- DC12V/300mA regulated power supply (DC12V only)
or AC24V Class 2 power supply (for the AC24V/DC12V model)
- To avoid a fire or shock hazard, use a CE certified power supply.
- Set the monitor impedance switch to 75ohm. Check the impedance
switch if the screen becomes blurred.
3. Camera Module Adjustment
- Loosen the screws for the 3-axis camera bracket to adjust the angle
of view of the camera.
- Make sure to retighten the screws for camera bracket.
- Set up the required functions by using the OSD buttons.
4. Dome Cover Mounting
- Replace the dome cover to the base and tighten the 3 screws.