Colour Micro-Cannon Vandal Cameras
22
Camera Installation
1. Loosen the two locking screws (1), using the supplied L-Wrench and remove the mounting base.
2. Attach the mounting base (2) to a suitable solid surface, such as a wall or ceiling. On partioning locate
a wall stud or ceiling joist. Secure the mounting base using the supplied screws (3). Fit the camera (4)
to the mounting base (2) and fix it into position using the two locking screws (1). Secure them with the
L-Wrench.
3. How to set the angle of view:
- Loosen the two locking screws (1), using the supplied L-Wrench, and set the desired camera angle
by moving the camera right / left and up / down. Re-tighten the two locking screws.
4. Connect the video connector (BNC) of the camera cable to the incoming video cable. The other end of
the video cable should be connected to a DVR or Monitor. Plug the camera power connector (red DC
Jack) into the DC12V regulated power supply. Switch on the power supply and the picture will now be
displayed on the Monitor.
Cable Connection
