PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
3
Windows XP
Windows Vista
Windows 7
Important information
For best results, a screen resolution of 800 x 600 pixels with 16 bit color dept or higher is
recommended for use with DTV applications. A screen resolution of at least 1280x1024 pixels with
24 bit color dept or higher is recommended for HDTV.
You should update all your system drivers (main board, graphics, sound and network adapter
drivers) to the current version before installing the driver for the DTV-PC TV device. You also should
update your operating system with all service packs and hot fixes available.
Package contents
X5075 ATSC/QAM Hybrid Device x1
Remote Cable x1
Remote Controller x1
Multi-Function Cable x1
Quick installation Guide x1 (PDF format only)
Software CD (Driver and Application Software)
Installation of the Hybrid
ATSC/QAM
X5075 Device
Installation of the PCI Express device
To install the
Hybrid
ATSC/QAM
X5075
PCI Express board make certain that the computer is
turned off. Precede the following steps to install the PCI Express card into your PC system:
1. Turn off the PC.
2. Open the case of your computer to expose the PCI Express slots.
3. Now you have to choose a free PCI Express slot. If possible choose a different slot than the slot
next to your AGP connector.
4. Unscrew the metal dust protector of the slot you have chosen.
5. Put the Hybrid
ATSC/QAM
X5075 board into the PCI E slot.
Figure 2.1: Inserting the DTV board into a PCI EXPRESS slot
6. Tighten the screw on the
Hybrid
ATSC/QAM
X5075
board.
7. Repeat the steps 3 to 6 for any additional PCI E xpress card you want to install.
8. Close the case of your computer case.
Your Hybrid
ATSC/QAM
X5075 hardware is installed now.
Installing the driver and software
Summary
In this chapter the installation of Hybrid
ATSC/QAM
X5075 PCI EXPRESS is exemplary
described for the operating system Windows XP ,Windows vista and Windows7.
Install the driver
