HOW TO USE YOUR HEATING PAD
- 3 -
Thank you for purchasing the Geniani heating pad, we
designed this heating pad to provide soothing heat
therapy to muscles in your back, legs, arms and more.
The Safety Plug
This heating pad has a polarized plug (one blade is
wider than the other) as a safety feature (Figure 3).
This plug will fit into a polarized outlet only one way.
If the plug does not fully fit into the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician.
Auto-off feature
To conserve energy and prevent skin burns caused
by prolonged use, the Geniani heating pad has an
auto-off feature. The unit will turn off automatically
after two hours of continuous use.
Using Geniani heating pad
The Control Connector must be connected to the
Pad Connector before plugging the unit into an
electrical outlet (Figure 4).
Plug the unit into a 120V AC electrical outlet.
To turn the heating pad on, press the ON/OFF button.
Use the ON/OFF button to select the desired heat setting: Low, Medium or High.
To turn the heating pad off, press the ON/OFF button one more time.
NOTE
:
If the unit does not turn on when you press the power button, make sure
the Control Connector is securely plugged into the Pad Connector.
INTRODUCTION
DO NOT ATTEMPT TO OVERCOME
THIS SAFETY FEATURE
A. Control Connector
B. Pad Connector
Figure 3
Figure 4
