5
2
Follow standard precautions for all electronic products.
Warning!
Ÿ
Disconnect from power source at least five minutes before removing
lens cover or servicing. Electric charge remains briefly after unit is
disconnected from electric power supply. Keep lens cover closed while
operating.
TM
Ÿ
Zap Strobes contain no user serviceable parts. Servicing must be
conducted by qualified technicians only.
Ÿ
Keep away from fire. Keep flammable material away from unit. Do not
operate in wet conditions or near liquids.
Ÿ
Keep air vents clear to avoid overheating. Never insert objects into air
vents.
Ÿ
Strobe lamps emit bright light. Do not look directly at lamp when lit.
Ÿ
Disconnect mains power supply immediately if strobe falls or is struck.
Have a qualified technician inspect for safety before operating.
Ÿ
Never remove warning or informative labels from the unit.
TM
About Zap Strobes
TM
ZAP Strobes deliver a powerful flash -- with either manual or remote control. Their
TM
stylish, lightweight case is ideal for mobile light shows or installations. Zap Strobes
come ready for use.
TM
Zap Strobe models FL-45P, FL-75P and FL-150P are very similar in construction:
Their main difference is varying lamp wattage.
TM
TM
1. Unpack your Zap Strobe. Zap Strobes come with lamp and bracket (A2)
installed.
2. Geni products are inspected at the factory and shipped in perfect condition. If
damage occurred in transport, please contact your Geni dealer immediately.
3. Use a 5-kg rated C-clamp to secure the strobe bracket (A2) to trussing. Allow one
meter (three feet) of space for cooling. After adjusting strobe angle, tighten the
bracket knob (A7). Strobe can be operated at any angle. The angle guide (A8),
showing degrees of slant, is there for reference.
Maintenance
Always disconnect power and wait five minutes before servicing. Wipe strobe body
clean with a damp towel. Use a mild glass cleaner and towel to clean the lens and
interior reflector as needed. Do not dampen electronic parts, lamp or surrounding
material. Do not use powerful solvents to clean the lens or body: discoloration or
distortion may result.
Product Specifications
Dimensions: 200mm diameter x 230mm length (not including bracket)
Flash rate: Approximately 1 to 12 flashes per second (1-12 Hz)
Remote trigger signal: 10V DC positive pulse
Signal jack: 1/4inch (6.35mm) mono microphone jack
FL-45P, FL-75P, FL-150P Fuse: TIA/20mm VDE
Voltages available from manufacturer: 120V~60Hz; 230V~50Hz
Note: The 230V~50Hz model can be used in 240V~50Hz environments.
TM
Name: Zap Strobe FL-45P
Lamp: Geni ST-045 high output helical xenon strobe tube
Weight: 1.25kgs (120V); 1.29kgs (230V); 1.36kgs (230V CE)
TM
Name: Zap Strobe FL-75P
Lamp: Geni ST-075 high output helical xenon strobe tube
Weight: 1.29kgs (120V); 1.33kgs (230V); 1.40kgs (230V CE)
TM
Name: Zap Strobe FL-150P
Lamp: Geni ST-150 high output helical xenon strobe tube
Weight:1.33kgs (120V); 1.40kgs (230V); 1.47kgs (230V CE)
