Technical Specifications:
Item Code: SSDL-6131
Name: MINI IMAGE
Voltage: 100~240V, 60HZ/50HZ
Light Source: 5W LED
Fuse: 125V/1A,250V/0.5A
Weight: 1.5kg
Size: L270 x W140 x H108 MM
Operational Instructions:
Installation (
Hanging Clamp
)
1. Use suitable and stable platform when installing or servicing fixture.
2. Align the clamp screw with the center hole on the yoke and tighten.
3. Verify the structure can hold 10 times the weight of all to-be installed fixtures.
4. Adjust the angle on the yoke arm as necessary.
5. Always use a safety cable or chain as a secondary source of attachment. The safety
cable must hold 10 times the weight of the fixture. If safety cable attachment point is
provided that is permanently affixed to the surface or body of the fixture, use that
instead of looping through a hanging yoke/arm.
6. Place the unit where there is efficient ventilation, away from any flammable and
explosive objects.
.7. Check that the rated power corresponds to the main supply.
Installing a Gobo or Filter
1. Disconnect the fixture from power and allow it to cool for 20 minutes if it has
been in use.
2. Remove the gobo holder at the side of the lamp by loosening screws.
3. Replace the gobo or filter.
4. Push the gobo holder in and screw the holder up.
