GENI MOVING HEAD OBY-5 User Manual Download Page 17

Maintenance

Refer maintenance to qualified technicians. Please disconnect power 
and signal wire before maintaining fixtures.

In order to preserve OBY-5 in good condition, keep the routine 
maintenance by following date.

The Steps are as follows:

Take the filter out (See Figure.) and clean it every two weeks.

The dichroic colour-filters, the metal gobo-wheel, the internal lenses 
and cooling fans should be cleaned with soft brush monthly.

The interior of the fixture should be cleaned at least half-yearly using 
a vacuum-cleaner or an air-jet.

Caution:

 Be careful not to damage the interior mechanical structures 

or circuits when using the air-jet.

To ensure a proper function and smooth rotation of the gobo-wheel, 
we recommend lubrication in six-month intervals.

Caution:

 Avoid the damage of interior structures when fixtures 

rotated, do not use excess lubrication.

Due to emit fog frequently, the optical lens and gobos would be oily; 
thus luminosity would be weak. We recommend using moist cloth or a 
trace of detergents to wipe them every two weeks. (Prohibit using the 
detergents consisted of alcohol and solvents.)

Filter

15

Summary of Contents for MOVING HEAD OBY-5




















Reviews: