Sbx (0~9):
select strobe frequency for each step of the internal program.
Fdx (0~9):
select the internal program to run the dreamy effect and there’re 10 available; 01 runs the fastest and 9 runs the
slowest.
Notes:
parameters of strobe effect are superior to that of the dreamy effect; If Stb is not 0, then the program will run as per
strobe effect but not dreamy effect even if Fad is not 0.
2.MANUAL
：
Keep pressing MENU and the working mode will switch automatically; Stop pressing MENU when it shows as the drawing
below and it enters the MANUAL mode, then the DMX address can be modified by pressing UP and DOWN.
R x x
G x x
B x x
Rxx (00~10):
set brightness of red
Gxx (00~10):
set brightness of green
Bxx (00~10):
set brightness of blue
3. Display of Temperature
：
Keep pressing MENU and the working mode will switch automatically; Stop pressing MENU when it shows as the drawing
below and it shows the temperature.
XXX
is the current temperature of the light board
。
X X X
4. MASTER/SLAVE
: The slave can run synchronously under DMX mode when the master is under AUTO or MANUAL mode.
Elimination of Common Malfunctions
：：
malfunctions
items need to be examined
Measures
Light doesn’t work
1.Check to see if the input voltage is
suitable;
2. Check to see if the fuse burns out;
1.Confirm the input voltage is in line with the
required voltage of light;
2.replace with fuse of same specification
LED is dim
1. Check to see if the input voltage is suitable
1.Confirm the input voltage is in line with the
required voltage of light;
DMX doesn’t
incept signals
1. Check to see if the connection for the
electrodes of DMX signal is correct;
2. Check to see if the working mode is DMX
1. Correct the electrodes of DMX signal.
2. Set it to be DMX mode.
第
页
共
5
页
5
