Solution:
Problem: Function dip switches have been set for "audio mode," but color
changer does not respond to music.
2. Have a qualified service technician inspect the PC board.
1. Disconnect power. Turnon Function dip switch #1. Turn off other
Function dip switches. Disconnect DMX signal cables. Reconnect
power supply. Turn on music.
1. Have a qualified service technician inspect the unit, including Triac
41600.
Solution:
Problem: Color changer light does not dim according to DMX slider positions.
12
Follow standard precautions for all electronic products.
Warning!
This appliance must be earthed (grounded). Disconnect from
power before removing covers or servicing. Keep case closed while
operating.
Color Blaster color changer contains no user serviceable parts.
Servicing must be conducted by qualified service personnel.
Lamp and components become hot during operation. Allow time to
cool before handling.
Keep flammable material at least one meter away from unit. Do not
operate in wet conditions or near liquids.
Keep air vents clear to avoid overheating. Never insert objects into
air vents.
Lamp produces hazardous UV light. Do not look directly at lamp
when lit. Do not expose skin to uncovered lamp.
If objects fall on unit, disconnect mains power supply immediately.
Have a qualified technician inspect for safety before operating.
Never remove warning or informative labels from the unit.
TM
Section 1 - Setting Up
Inspection
3. Operating manual
2. IEC power cord
1. Color Blaster color changer
Packing list:
Every Color Blaster color changer was thoroughly tested and shipped in
perfect condition. Carefully unpack your Color Blaster color changer and
remove the bag with components from the carton. Inspect equipment for
shipping damage. If shipping damage has occurred, contact your Geni dealer
immediately.
TM
TM
TM
3
Summary of Contents for Color Blaster CB-250
Page 2: ......
