Mains Power
The Power Supply should be supplied by a dedicated electrical power source rated for a minimum 5 Amp
load and have a dedicated circuit breaker. Connect the Power Supply module to mains input via an
appropriate IEC-C7 90 degree cable.
The earth wire shall be routed to the V- terminal on the Power Supply.
Warning:
This installation should be made by qualified service personnel and should conform to
all local codes.
Termination of wiring to the Power Supply while power is applied or the battery is
connected may cause serious damage to the Power Supply and will VOID ALL
WARRANTIES OR GUARANTEES. Power the unit only after all wiring, configuration
and jumper settings are completed.
Extra care must be taken when wiring the AC inputs. Improper connection will cause
permanent damage to the Power Supply.
Mains Power
Last updated June 2019
11
