SV-16 v2 Quick Start Guide
Introduction
EN.800.003-V2.11(2)
2
Requirements:
• To run the SV-16 v2 at full capacity, you’ll need to turn off software motion
detection. Use unit based motion detection instead.
• The IP cameras or encoders must be connected to the SV-16 v2 through an IP
network using a network switch.
NOTE
On average, a camera configured at 4CIF 30 fps in H.264 will have
a bit rate of 1 Mbps. The camera connections can either be a mix of IP
cameras, or analog cameras connected to IP encoders.
Supported access control configurations
If the client application is installed on a remote computer, the SV-16 v2
supports up to 16 access control readers.
Supported video and access control configurations
The SV-16 v2 supports up to 8 cameras recording at 2 Mbps, 4 cameras
being viewed at 2Mbps, and 8 access control readers.
About software licenses
SV-16 v2 licenses are based on the number of cameras and access control
readers you want to connect to Security Center. Each license includes the
following:
Item
Supported with Security
Center
Supported with
Omnicast
Directory
1
1
Archiver
1
1
Access Manager
1
Virtual matrix
1
Gateway
1
Media Router
1
Client connections
5
5
CCTV keyboard
1 connection
1 connection
Audio support
Yes
Yes
Web clients
Security Center Web Client
(requires an additional
server)
Live Viewer and Archive
Player applications
