Interlogix
genetec.com | Omnicast Video Unit Configuration Guide 4.8 SR3
50
EN.100.007-V4.8.C3.(1)
Interlogix
This section describes the additional configuration steps required for some Interlogix units to
work in Omnicast.
This section includes the following topics:
•
"Configure Discovery 105-E (UVE-101) units"
•
Configure Discovery 105-E (UVE-101) units
The following configuration must be performed before adding Discovery 105-E (UVE-101)
units in Omnicast.
1
Open the unit’s Web page.
2
Click
Administration
.
3
Enter you username and password.
4
Click
Video port format
.
5
Set the
Video port format
to
NTSC M
or
PAL
depending on the camera connected to the
encoder.
6
Click
OK
to save your changes.
