Pozi Screwdriver or as a Drill Bit on a Drill
Tools Required
Two competent people
wearing
safety gloves
,
safety shoes
and
protective eyeware
are recommended to undertake the assembly.
Safety Precaution
scan for more info
1
2
3
2. Check the diagram on the next page before installation
Attach the left side of the top piece of cladding to the top hole of the first upright on the
bay by fixing it using ‘the screw’ and screwdriver. Do not tighten the screws at this
stage, use the diagram on the next page to locate the positions for other screws.
(If this is a single bay, you can fix the right side of the clad to the second upright now)
3.
Attach the lower cladding sheet to the upright overlaping the clad above
by fixing it with the screws as shown on the screw positions diagram.
4.
Attach the next top cladding sheet to the upright on the extension bay, overlaping
the previous piece of top cladding. Secure using ‘the screws’ as per the screw
positions diagram.
5.
Now attach the next lower cladding sheet to the upright, overlaping the previously
placed cladding by fixing it with ‘the screws’ as shown on the screw positions diagram.
If you have more than 2 bays in the run, repeat the process from step 4.
Overlaping
top and bottom clad
4
5
Top View
Overlap
Top View
Overlap
Build Expo 3 or Expo 4 bay or a run of bays as you require.
(please refer to specific assembly instructions to build the bays)
No bracing is needed as the cladding will brace the bays!
‘The screw’ we refer to in this document to fix the back
cladding is:
6.3 x 13mm Pozi Pan Head Self Tapping Screw
( comes with cladding )
EXPO - SOLID SHEET BACK CLADDING
Assembly Instructions
V1.0