Chapter 6: Performing Advanced Operations
Placing Calls On Hold
User’s Guide
53
2.
To toggle between the calls, press the navigation control's upper or lower rim.
Note:
To enable / disable the call waiting feature, see page
Placing Calls On Hold
You can place a call on hold, to answer a second incoming call (see page
) or to make
another call.
To place a call on hold:
Press the HOLD key; the call is put on hold:
To retrieve a call on hold:
Press the HOLD key again -OR- press the
Resume
softkey.
Calling a Contact Listed in the Directory
Here's how you call a contact listed in your directory.
To call:
1.
Press the CONTACTS key and then the
Select
softkey to access the directory.
2.
Press the navigation control's upper or lower rim to navigate to the contact to call
(see also page
