Copyright 2016 Luminite Electronics Ltd
All rights reserved. Unauthorised duplication of this handbook by any means
mechanical or electrical, is strictly prohibited without the express written permission of
Luminite Electronics Ltd.
Luminite Electronics Ltd acknowledge all registered trademarks
Luminite Electronics Ltd reserve the right to make changes to this handbook and to its
products without prior notice in order to improve design or performance characteristics.
PRE-INSTALLATION NOTES
Unpacking
On receipt, inspect the package and contents for signs of damage. If damage has oc-
curred, advise the carrier and/or suppliers immediately. Inspect the contents to confirm
that all items are present and undamaged. If any items are missing or damaged, contact
the supplier immediately. It is advisable that the original carton is retained as this forms
the safest transport container in the event that a unit has to be returned for any reason.
Servicing
This unit should not require general servicing. Any repair work should only be under-
taken by qualified service personnel.
Moisture
Do not expose the internal electronics of this unit to moisture i.e. take care during installa-
tion or when changing batteries not to allow rain or damp into the product. When the
product is sealed it is water resistant to IP67.
Box Contents
1 x
GENESIS
wireless PIR detector
1 x 1/4 wave antenna
1 x sun shield
2x C cell alkaline batteries (May already befitted in detector)
4 x no 8 wall plugs
4 x no 8 2” screws
1 x 3 mm hexagonal key
LGWP-15/40/VC/HC Wireless PIR Detector Installation Handbook
Page 2
LGWP Wireless PIR Detector Specification.
Suitable for BS8418 systems. Grade 2 EN50131-1
Lens types
15 metre x 90deg
40 metre x 1deg
Horizontal curtain 12 metre 90 deg
Vertical curtain 12 metre 90 deg
Mounting height
1.5-4metres
Alarms & tampers
Detection / Anti Tamper / Anti Cloaking / Shock/3 Axis inertia
Compensation
Day light and temperature compensation
Batteries
2 x 1.5 volt alkaline C cells
Battery life
2 years approximately. ( Depending on number of activations)
RF output
434.525Mhz 10m/w
RF range
1 Km line of sight
Encoding
Rolling code
Call In
Every 60-80 seconds
Enclosure
3 mm polycarbonate (except for Fresnel lens and wall bracket)
IP rating
67
Temperature range –10 to +60 deg C
Types of tamper
Front cover micro switch
Activated when the cover screw is removed.
Shock sensor
Piezo sensor detects physical attack of the product.
Anti masking
Active IR and
LDR sense when the front window/lens is obscured.
LGWP-15/40/VC/HC Wireless PIR Detector Installation Handbook
Page 19
