English
13,000 Lumen LED Work Light w/ Tripod
Operator’s Manual GWL13130T
ATTACH THE WORK LIGHT ASSEMBLY TO
THE TRIPOD (FIG 2)
Place the work light assembly on the top of the tripod. Insert
the locking screw (14) through the hole on the carrying handle.
Tighten the screw to secure the work light assembly on the tripod.
OPERATION
ON/OFF SWITCH
Each of the work light heads has an On/Off switch (10-FIG 1) located on the back side of the work light. Press "I"
to turn the work light on and press "O" to turn it off. Always turn the work light off before unplugging.
MAINTENANCE
Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive
cleaner. Use the similar care for the stand and tripod.
WARNING:
Always make sure the work light is unplugged and
completely cool before attempting to clean it
.
TWO-YEAR WARRANTY
This product is warranted free from defects in material and workmanship for 2 (Two) years after date of purchase.
This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original
purchaser is covered by this warranty and it is not transferable. Prior to returning your tool to store location of
purchase, please call the Toll-Free Help Line for possible solutions.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.
TOLL-FREE HELP LINE
For questions about this or any other GENESIS Product, please call Toll-Free:
888-552-8665
.
Or visit our web site:
www.genesispowertools.com
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
4
FIG 3
12
13
