English
5.8 Amp, 4-1/2" Circular Saw
Operator’s Manual GCS545C
SPECIFICATIONS
• Model: ------------------------ GCS545C
• Rated Power: ------------------ 120V~ /60Hz, 5.8 Amp
• No Load Speed: --------------- 3500 RPM
• Blade Size: -------------------- 4-1/2” (115mm)
• Arbor Size: -------------------- 3/8” (9.5mm)
• Cutting Capacity at 90°: -------1-11/16” (42.8mm)
• Cutting Capacity at 45°: -------1-1/8” (28mm)
• Net Weight: -------------------- 5.5 lbs
Includes: 24T Carbide-tipped blade, Rip guide, Vacuum adaptor and Allen wrench
WArNING:
T
o reduce the risk of injury, user must read and understand this
operator’s manual before operating this tool. Save this Manual for future reference.
Toll-Free Help Line: 1-888-552-8665
WArNING:
The Operation of any power tool can result in foreign
objects being thrown into your eyes, which can result in severe eye damage.
Before beginning tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with side
shields. Always wear eye protection which is marked to comply with ANSI Z87.1.
Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.
GENErAL SAFETY rULES
WArNING:
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles
.
WArNING:
read and understand all warnings, cautions and operating
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
•
Keep your work area clean and well lit.
Cluttered benches and dark areas invite accidents.
•
Do not operate power tools in explosive atmospheres
,
such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
WeAR YOuR
fOReSIGHT IS BeTTeR
THAN NO SIGHT
SAfeTY GLASSeS
