36
Item
Description
SPOT MODE
Channels display in spot for three different modes:
MANUAL:
select channels to display manually.
SEQUENCE:
Auto-sequence for all channels in order.
EVENT:
Display channels with event occurred.
Interval (Seconds)
The duration time in seconds for the interval between channels under
SPOT mode.
Skip V ideo L oss
Channel
Whether to skip channels without video signal.
4-9 UTILITY SETUP
Item
Description
HDD Initialization
Select to enter hard disk initialization menu.
Please stop
recording before enteri ng this menu.
Enter t he m enu,
system will show all the data (model ,volume ) of HDD that
installed in DVR. Check t he HDD you’d like to i nitialize
then pr ess “S tart”. HDD i nitialization is s uccessful when
the status shows “Succeed”
USB Initialization
Clean up all data on U SB. Ent er USB initialization and
press YES t o cl ean up al l data on your USB. The
initialization is done when it’s showed “Succeed”.
System Recovery
Restore system default values
Reset System Events
Reset all the recording events in DVR.
Copy Setup to USB
Copy configuration to a USB de vice. T here will be a file
named “sdvr.config” on your USB.
Download Setup from USB
Download configuration from a USB device into DVR.
Upgrade
Upgrade DVR through USB.
Please s top recor ding and backup setup conf iguration
before upgrading.
System will reboot automatically when the upgrade is
completed.
Notice! DO NOT T URN OFF POWER OR UNPLUG USB DEVICE DURING THE UPGRADE
as it may cause incomplete firmware upgrade and damage to the DVR.