Tel: +44 (0)1642 713000
Email: [email protected]
www.genesis-gs.com
UK Head Office & Factory
Stokesley Business Park Stokesley
North Yorkshire TS9 5JZ UK
P.V.C. Trim • Stair Nosings • Movement Joints • Transitions • Entrance Matting• Edge Protection • Metal Profiles • Tactiles• Tools
-
Securely connect the Vacuum Hose to the Duct
of [a] Main Unit by [p] Hose Adapter,
- Then turn the Angle Grinder and Vacuum on,
- Start cutting.
Warning!!
1. Make sure the blade is cutting in the right
direction.
2. Ensure no gaps between the material and
bottom surface of [a] Main Unit, otherwise
the dust could escape.
Cutting
Depth Adjustment
Vacuum Hose
[p]
Duct
1. Release the thumb screw.
2. Match the base line with the scale line of the required cutting depth.
3. Tighten the thumb screw.
B334504 Instruction Booklet
Base Line
[a]
Scale
Thumb Screw
Cutting Depth
