8
Start recording:
Press and release the
button, the icon
and [:] displayed
in LCD will flash. At the same time the red indicator will flash too, meaning
the recording is in process.
Stop recording:
Press and release the
button, the icon
and [:] displayed
in LCD will stop flashing. At the same time the red indicator will stop flashing
either, meaning the recording is stopped.
When the TF card is full, or the battery runs out, the recording will stop
automatically, and the recorded video will be saved before the DV turns off.
2. Photo
To take a photo, please check whether the DV is under Camera mode. If the
icon is not displayed on the screen, press the
button repeatedly until it
appears.
Press and release the
button, a beep will be heard and the red indicator will
flash, meaning a photo is taken.(If you take photos more than 999 copies, the
LCD screen display only 999)
3. Enable/disable Wi-Fi
The Wi-Fi is disabled by default. Press the Wi-Fi button on the side of the DV
to enable it. When starting connecting to Wi-Fi network, the indicator will
flash, and when a Wi-Fi network is connected, the indicator will remain on,
and the Wi-Fi icon will display on LCD screen.( In order to save power, Wi-Fi
will be automatically disabled if no terminal is connected after 30 seconds)
Summary of Contents for WDV5000
Page 1: ...1 WDV5000 User Manual...
