- 11 -
If the game continually enters into the PIR area of the main sensor,
the camera takes pictures immediately, therefore catching the
whole body of the game. This split-second process could be as
short as 0.2 second.
In the case the game browses only in the PIR area of the prep
sensors, to avoid the camera being powered on constantly, the
system is designed to work in the following way: If the game does
not enter the PIR area of the main sensor and therefore not trigger
the main sensor, the camera will power off after 3 seconds. If the
trigger events consecutively happened twice only in the PIR area
of the prep sensors, the camera will not be activated by the side
prep sensors, but only by the main sensor. So later on when the
game enters the PIR area of the main sensor eventually, since it is
not in fast movement, the picture will by all means capture the
whole body of the game based on our standard 1 second response
time.
ADVANCED
ADVANCED
ADVANCED
ADVANCED SETTINGS
SETTINGS
SETTINGS
SETTINGS
The hunting camera trail camera comes with preset manufacturer
settings. You can change the settings to meet your requirements.
Please make sure the camera is in the test mode.
3.1
3.1
3.1
3.1 Parameter
Parameter
Parameter
Parameter Settings
Settings
Settings
Settings
Press “MENU” key to enter/exit the menu. Press
,
to move
the marker,
,
to
