Po
rt
ug
uê
s
En
gl
is
h
Es
pa
ño
l
Po
rt
ug
uê
s
En
gl
is
h
Es
pa
ño
l
57
8. Maintenance:
The purpose of the maintenance plan is to ensure that the generator remains in
good working condition and that it reaches the maximum of its useful life.
DANGER:
Turn the engine off before doing any maintenance. If you need to
start the engine for any checking, first ensure that the area is well ventilated. The
exhaust gases contain carbon monoxide, which is poisonous to the user.
NOTE:
Apply only GENERGY original parts or, if not available, components of
proven quality.
Maintenance plan:
SERVICE
STAGES OF MAINTENANCE
Engine oil
Check the oil level before each use. After 20 hours, the first oil change
should be made. Every 100 hours of use, do new oil changes.
Air filter
Check and clean every 50 hours. At a maximum of 250 hours or
earlier if it is damaged, replace.
Spark plug
Clean and adjust the electrode every 50 hours. At a maximum of 250
hours or earlier if it is damaged, replace.
Spark arrestor
Every 300 hours or 1 year, clean.
Engine valves*
Adjust every 500 hours*
Combustion chamber *
Clean every 500 hours*
Fuel tank*
Clean every 500 hours*
Fuel hose*
Replace every 2 years or earlier if it is damaged*
NOTE:
If you use the generator in places with a lot of dust or with high
temperatures, does more frequent maintenance.
NOTE:
All services marked with an asterisk (*) should be performed by
Genergy Technical Service or a Genergy Authorized Service. You must save the
report of the work done by the workshop.
NOTE:
The failure of compliance with the maintenance plan will shorten the
life of the generator and will increase the possibilities of malfunctions or damages.
The warranty will not be applied in these cases. If one or more services planned
were not done, the warranty will not be applied, unless authorized by the Genergy
Technical Service or a Genergy Authorized Service.
