27
Engl
is
h
1
Loosen and remove the A wing nut
2
Lift the filter cover
3
Loosen and remove the B wing nut
4
Remove the filtering cartridge
5
Separate the sponge from the
paper filter.
6
Only clean the
sponge pre-filter
in
a soap and water solution. Allow it
to dry completely.
7
Dip the dry
sponge pre-filter
in oil,
the same type used in the
generator engine.
8
Drain by pressing the
sponge pre-
filter
with your hand.
9
Now shake the
paper filter
against
a hard surface, you can also clean
it with an air compressor (maximum
2 BAR).
10
Once the paper filter is clean, mount the sponge pre-filter on the paper filter
and assemble the complete and clean filter on the machine by following the
same steps used for disassembly.
A WING NUT
COVER
B WING NUT
SPONGE
PAPER FILTER