34
Figure 28:
IE8 Internet Options
– Languages
4.2.13
Events / Alarms
The Event/Alarm-pages are the main feature of the CS121-configuration and are based on a
combination of events and actions (resp. Jobs). At CS121 there are various events defined,
such as e.g. “Powerfail”, “UPS Battery bad”, “Battery low” etc. Each event the CS121 allows
you to release one or more actions. An action can be e. g. write a log file entry in the alarm log
(as default all events do perform a log file event), to send an email or to perform an RCCMD
Command (e. g. shutdown signals to several RCCMD clients). For a short introduction into the
handling of events and actions see also the sectio
n “Quickstart”.
In this menu the relationships between system events such as alarms and the actions to be
taken those events are defined.
To configure your events and actions open the
menu “Events / Alarms”. The menu “Event
Configuration” displays an overview about the events and the number of configured actions.
Figure 29:
HTTP - Event Configuration with tool tip
Select the desired event and configure it into the event editor.
