Generalscan MiniRing GS R5000BT-51C, Configuration Manual

Page: 97 / 173

Code 93
Enable/Disable Code 93
Parameter # 09h
To enable or disable Code 93, scan the appropriate bar code below.
Set Lengths for Code 93
Parameter # L1 = 1Ah, L2 = 1Bh
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 93 to any length, one or two discrete lengths, or lengths
within a specific range.
•
One Discrete Length - Select this option to decode only Code 93 symbols containing a selected length.
Select the length using the numeric bar codes in Appendix
B
, Numeric Bar Codes . For example, to
decode only Code 93 symbols with 14 characters, scan Code 93 - One Discrete Length , then scan 1
followed by 4 . To correct an error or to change the selection, scan Cancel on page
B
-2 .
•
Two Discrete Lengths - Select this option to decode only Code 93 symbols containing either of
two selected lengths. Select lengths using the numeric bar code s in Appendix
B
, Numeric Bar
Codes . For example, to decode only Code 93 symbols containing either 2 or 14 characters, select
Code 93 - Two Discrete Lengths , then scan 0 , 2 , 1 , and then 4 . To correct an error or to
change the selection, scan Cancel on page
B
-2 .
•
Length Within Range - Select this option to decode a Code 93 symbol with a specific length
range. Select lengths using the numeric bar codes in Appendix
B
, Numeric Bar Codes . For
example, to decode Code 93 symbols containing between 4 and 12 characters, first scan Code 93 -
Length Within Range . Then scan 0 , 4 , 1, and 2 (enter a leading zero for single digit numbers). To
correct an error or change the selection, scan Cancel on page
B
-2 .
•
Any Length - Scan this option to decode Code 93 symbols containing any number of characters
within the decoder’s capability.
Enable Code 93
(01h)
*
Disable Code 93
(00h)
G S -R 5000 -51C Barcode Configuration Document