WARRANTY INFORMATION
General Tools & Instruments’ (General’s) LDM60 Laser Distance
Meter 200 ft. (60m) is warranted to the original purchaser to be
free from defects in material and workmanship for a period of
three years. Subject to certain restrictions, General will repair or
replace this product if, after examination, the company
determines it to be defective in material or workmanship. The
warranty period begins on the date of purchase. You are
encouraged to register your product online. General will extend
your warranty an additional 60 days if you register at
www.generaltools.com/ProductRegistry.
This warranty does not apply to damages that General
determines to be from an attempted repair by non-authorized
personnel or misuse, alterations, normal wear and tear, or
accidental damage. The defective unit must be returned to
General Tools & Instruments or to a General-authorized service
center, freight prepaid and insured.
Acceptance of the exclusive repair and replacement remedies
described herein is a condition of the contract for purchase of
this product. In no event shall General be liable for any incidental,
special, consequential or punitive damages, or for any cost,
attorneys’ fees, expenses, or losses alleged to be a consequence
of any damage due to failure of, or defect in any product
including, but not limited to, any claims for loss of profits.
Register now at www.generaltools.com/ProductRegistry to
receive a 60-day extension to your warranty.
29
