16
Power/Reset
Backlight
m/ft counter
USING THE PROBE LENGTH COUNTER
The probe length counter on the front of the P16PIP
can help you gauge the position of the camera head
as you feed the 72 ft. long probe into a pipe or duct.
To power on the counter
, press and hold the
button for at least 3 seconds.
The counter’s default measurement unit is
meters.
To switch to feet
, press the
m/ft
button.
To reset the counter
to 0.0, press (but do not hold) the
button.
To backlight the LCD
for 10 seconds, press the
button.
The probe length counter will automatically power itself off if no buttons are pressed during any
period of one hour.
When a “Low Battery” icon appears on the LCD, change the two “AAA” batteries that power the
counter, following the instructions on page 9.
SPECIFICATIONS
CONSOLE
Display Type
Color TFT LCD
Display Size
3.5 in (89mm) diagonal
Display Resolution
320 by 240 pixels (QVGA)
Video Recording Resolution
320 x 240 pixels (QVGA)
Video File Format
.avi
Photo Recording Resolution
640 x 480 pixels (VGA)
Photo File Format
.jpg
Video Out Formats
NTSC, PAL
Video Frame Rate
30 frames per second (fps)
Compression Format
Compatible with MPEG4
Signal-to-Noise Ratio
42dB or greater
Recording Medium
Standard-size SD card
Interfaces
AV Out, USB 2.0
Languages
English, Spanish, Italian, French, German, Portuguese,
Traditional Chinese, Simpified Chinese, Japanese, Danish,
Dutch, Polish, Russian, Bulgarian, Turkish, Swedish, Finnish,
Norwegian, Estonian, Lithuanian, Latvian, Hungarian, Czech,
Slovak, Slovenian, Romanian, Greek