9
5) Trouble Shooting
1.Unable to turn on the console
Users will not be able to turn on the console when the battery is very
low or empty. Please re-charge before use.
2.Can turn on the unit but the image does not appear on the monitor
Please check the insertion tube connector or simply re-connect the
insertion tube to correct the problem.
3.Unable to capture photos/videos
Please check the status of the SD card. Users will not be able to
capture photos or video if the SD card is not installed properly or if it
is full, write protected or damaged.
6) Insert Tube Maintenance
•To avoid danger, please do not put the insert tube into any flammable
liquid or gas.
•The insert tube contains a series of small wires that control the optics
and electronics of the camera tip. To ensure long-term reliability, do
not bend the insert tube more than 180 degrees, and always bend
the insert tube in as large an arc as possible during usage and
storage.
7) Camera and Lens cleaning
•User may clean the camera lens with a cotton swab and small
amount of cleaning naphtha.
DCS1600-1P-070310:Layout 1 7/3/10 12:36 PM Page 9