En-6
PREPARATION
Turn on the Power
1
Connect the power plug to an
electrical point.
Connect securely,
without looseness.
In the case of direct line connections,
turn on the breaker.
Slide in the direction of the arrow
while pressing the
mark.
Be sure to align the battery
polarities (
) correctly.
Load Batteries (R03/LR03
×
2)
1
Press and slide the battery compart-
ment lid on the reverse side to open it.
2
Insert batteries.
3
Close the battery compartment lid.
CAUTION
●
Take precautions to prevent infants from accidentally
swallowing batteries.
●
When not using the remote control unit for an ex-
tended period, remove the batteries to avoid possible
leakage and damage to the unit.
●
If leaking battery fluid comes in contact with your skin,
eyes, or mouth, immediately wash with copious
amounts of water, and consult your physician.
●
Dead batteries should be removed quickly and
disposed of properly, either by placing in a public
battery collection receptacle, or by returning to a
properly equipped dealer.
NOTE:
●
Never mix new and used batteries, or batteries of
different types.
●
Batteries should last about one year under normal use.
If the remote control unit’s operating range becomes
appreciably reduced, replace the batteries and press
the ACL button with the tip of a ballpoint pen or other
small object.
9385175310_OM_en.p65
13/12/2011, 1:15 PM
6