Page
4
of
4
208-265-5244
Rail Configuration
A.
BLACK POWDER COATED TEE
B.
SQUARE GALVANIZED CENTER TUBE WITH ROUND TUBE BUSHING
C.
ALUMINUM ANGLE CROSS PIECE
D.
UNIVERSAL ALUMINUM T-SLOT EXTRUSTION RAILS
E.
ALUMINUM FLAT BAR WITH 2 HOLES
Note:
Rails may toe in or toe out depending on panel mounting hole location. Number of
panels may vary.
Instructions for Attaching Solar Panel to Mounting Rails
Lay T-Slot rails across the short axis
of the panel as shown in Photo #1.
Slide stainless bolts into T-slot of
rail and position so they are
opposite to the mounting holes on
the frame of the panel as shown in
Photo #2.
Then roll the rails over so the bolts
slip into the holes on the panel
frame. Place the flange nut on your
finger with the flange UP and thread
onto the bolt from underneath as
shown in Photo #3. Finger tighten.