Hot-Shot™
Safety Instructions
WARNING
Machine must be plugged
into properly grounded
outlet. Failure to follow
instructions may result in
serious injury or death.
Do not operate power tools
in explosive atmospheres,
such as in the presence of
flammable liquids, gases, or
dust.
Use safety equipment.
Always wear safety glasses
and rubber soled, non-slip
shoes.
READ AND UNDERSTAND
ALL INSTRUCTIONS!
Failure to follow all instructions listed below
may result in electric shock, fire and/or serious
personal injury.
Call General’s customer service department at
412-771-6300 if you have any questions.
SAVE THESE INSTRUCTIONS!
Work Area Safety
1.
Keep your work area clean and well lit.
Cluttered
benches and dark areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Power tools
create sparks which may ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away
while operating a power tool.
Distractions can
cause you to lose control.
Electrical Safety
1.
Grounded tools must be plugged into an outlet,
properly installed and grounded in accordance
with all codes and ordinances. Never remove
the grounding prong or modify the plug in any
way. Do not use any adapter plugs. Check with
UL approved tester or a qualified electrician if
you are in doubt as to whether the outlet is
properly grounded.
If the tool should electrically
malfunction or break down, grounding provides a
low resistance path to carry electricity away from the
user.
!
2.
Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is grounded.
3.
Don’t expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
4.
Do not abuse the cord. Never use the cord to
carry the tools or pull the plug from an outlet.
Keep cord away from heat, oil, sharp edges or
moving parts. Replace damaged cords
immediately.
Damaged cords increase the risk of
electric shock.
5.
When operating a power tool outside, use an
outdoor extension cord marked “W-A” or “W”.
These cords are rated for outdoor use and reduce
the risk of electric shock.
6.
Use only three-wire extension cords which have
three-prong grounding plugs and three-pole
receptacles which accept the tool’s plug.
Use of
other extension cords will not ground the tool and
increase the risk of electric shock.
7.
Use proper extension cords.
Insufficient
conductor size will cause excessive voltage drop
and loss of power.
8.
Extension cords are not recommended unless
they are plugged into a Ground Fault Circuit
Interrupter (GFCI) found in circuit boxes or outlet
receptacles.
The GFCI on the machine power cord
will not prevent electric shock from the extension
cords.
9.
Keep all electric connections dry and off the
ground. Do not touch plugs or tools with wet
hands.
Reduces the risk of electric shock.
Personal Safety
1.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication.
A moment of
inattention while operating power tools may result in
serious personal injury.
2.
Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught in
moving parts.
3.
Avoid accidental starting. Be sure switch is off
before plugging in.
Plugging in tools that have the
switch on invites accidents.
4.
Do not overreach. Keep proper footing and
balance at all times.
Proper footing and balance
enables better control of the tool in unexpected
situations.
2
