Section 1. Specifications:
Wavelengths
1550, 1310, 1060, or 780nm
Fiber Type
SM: 1310/1550nm: Corning ClearCurve ZBL or equiv.
1060nm: Corning HI1060 or equiv.
780nm: Nufern 780HP or equiv.
PM: 1550nm: Bend insensitive PM with MFD=6.5µm
1310nm: Bend insensitive PM with MFD=6.0µm
1060nm: Nufern PM 980XP or equiv.
Insertion Loss
<0.5 dB (at
λ
c, excluding mode coupling loss and
connectors)
Return Loss
>58 dB without connectors
>55 dB with APC connectors
>50 dB with PC connectors)
Total Phase Shift
@500Hz, Vpp=150V
>65
π
(at 1550nm)
Half Wave Voltage (V
π
)
@500Hz
2.5-4.5V typical (small frame)
0.7-1.5V typical (large frame)
Resonance Frequency
8-14kHz typical
V
π
@resonance
frequency
0.1-0.5V typical
PDL
SM: <0.05 dB
PM: <0.1 dB
PER
PM: >18 dB with connectors
Residual Amplitude
Modulation
±0.01 dB (at 1550nm)
Capacitance of Piezo
0.18µF
Maximum Applied
Voltage
150V
Electrical Interface
Molex WM9131-ND or equivalent
Operation Temperature
0 to 50° C
Storage temperature
−
40° to 85° C
Fiber Length (Internal)
1
36 ± 2 cm (small frame)
93 ± 2 cm (large frame)
Dimensions
Small frame: 35.0 (L)
×
17.0 (W)
×
10.0 (H) mm
Large frame: 45.0 (L)
×
27.0 (W)
×
11.0 (H) mm
Notes: Unless otherwise stated, specifications in this table are for devices without connectors at 23±5°C.
1.
From edge of enclosure at input port to edge of enclosure at output port, not including boots or
pigtails. Total fiber length including pigtails will be provided in test data for each FPS-002.
Document #: GP-IN-FPS-002-11
Page 4 of 9
