manualshive.com logo in svg

General Music Pro 2, Owner'S Manual

Share
Download
General Music Pro 2 Owner'S Manual Download Page 62

FEDERAL COMMUNICATIONS COMMISSION

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this instrument does cause harmful interference to radio or
television reception, which can be determined by turning the instrument off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and the receiver.

-

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-

Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications  to this product not expressly approved by the manufacturer could void the user’s

authority to operate this product.

Summary of Contents for Pro 2
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands