General Monitors S216A, Instruction Manual

Page: 26 / 39

Relay Options Mode (
continued
)
l
Warn Relay Latching/Non-Latching
The dis play will al ter nate be tween
LA
and
nL
(fig ure 21) un til a se lec tion is
made. When the de sired op tion ap pears
on the dis play, ap ply the mag net mo men -
tar ily to the GMI Logo on the cover of
the Model S216A.
fig ure 21
l
Warn Relay Set Point
The Model S216A will dis play the Set
Point op tions (fig ure 22) un til a se lec tion
is made. When the de sired op tion ap -
pears on the dis play, ap ply the mag net
mo men tar ily to the GMI Logo on the
cover of the Model S216A. The op tions
that are avail able for the Warn Set Point
will vary with the de tec tion range of the
Model S216A (0 to 100ppm, 0 to 50ppm
or 0 to 20ppm). Units with a 0 to
100ppm de tec tion range can have a Warn
Set Point be tween 5 and 95 in in cre ments
of 5. Units with a 0 to 50ppm de tec tion
range can have a Warn Set Point be -
tween 5 and 45 in in cre ments of 5. Units
with a 0 to 20ppm de tec tion range can
have a Warn Set Point be tween 2 and 18
in in cre ments of 2. If the de sired Warn
set point is higher than the cur rent Alarm
set point, it will be nec es sary to set the
Alarm set point then re- enter the Setup
Mode to set the Warn set point.
fig ure 22
l
Alarm Relay Energized/De-Energized
The dis play will al ter nate be tween
En
and dE
(fig ure 20) un til a se lec tion is
made. When the de sired op tion ap pears
on the dis play, ap ply the mag net mo men -
tar ily to the GMI Logo on the cover of
the Model S216A.
l
Alarm Relay Latching/Non-Latching
The dis play will al ter nate be tween LA
and
nL
(fig ure 21) un til a se lec tion is
made. When the de sired op tion ap pears
on the dis play, ap ply the mag net mo men -
tar ily to the GMI Logo on the cover of
the Model S216A.
Relay Options Mode (
continued
)
l
Alarm Relay Set Point
Model S216A Operation
21