18
be shown information as following on the display by sequence:
1. “Input phone password”——If you have set the password.
2. “Input PIN” —— If you set SIM card password.
3. “No service”—Indicates fail to make register and cannot make any calls.
4. “Emergency calls only”—indicates has registered to other network and only can make call to 112.
5. “Searching”—the mobile phone is searching network until find appropriate network;
6. “Operator name”—Indicates network successfully registered.
Note: If you do not know PIN code, please contact the network service provider.
The defaulted phone password “1122”
Switch off
To switch off the mobile phone, press the end key. When the screen displays switch-off cartoon, the host
and the slave will be off at the same time. Do not take out the battery to switch off the mobile phone. If so,
the SIM card can be damaged easily and some data will be lost.
Dial a Call
With the number keypad, you can enter phone numbers (if wrong characters are input, press the clear
key to delete them). Press the dial key to dial the phone number. In SIM1 and SIM2 On state, you can
choose to dial a call via SIM1 or SIM2. To end a call, press the end key; or to cancel a dial, press the
Cancel key or the switch-on/off key. After the call is connected, you can see the call timer on the
screen.
Dial a call via phonebook: Enter the phonebook and search the desired name/phone number, and then
press dial key to dial call.
Redial latest dialed number: In standby state, press dial key to view the list of the latest dialed 40
phone number or names. Roll to the desired phone number or name and press dial key to dial call.
Summary of Contents for DST12
Page 1: ...1 ...
