General International BT8008, Setup And Operation Manual

Page: 15 / 40

15
ENGLISH
141212
6. Start and operate the power tool in the
normal way.
7. When the job is complete, turn off the power
tool, then move the On/Off switch of the
dust extractor to the “0” position.
MAINTENANCE &
SERVICING
WARNING!
Make sure the switch is in
the “off” position and unplug the unit from
the power source before performing any
maintenance.
This machine operates on 120 V; if you
suspect any electrical problems call a qualified
electrician to do the verification of the electrical
circuit or the machine.
● Periodically inspect all hardware, fittings
and fasteners that may have loosened due
to vibration - retighten as needed.
● Keep the motor housing clean of dust and
dirt.
● Remove dust and dirt from the tool
regularly with a soft cloth, brush or
compressed air. Keep the outside of the
unit clean and wipe off excessive dust or
dirt with a dry rag.
● Periodically inspect inside all pipes,
fittings, hoses, blast gates, and connectors
for accumulated dust build-up or other
obstructions, and clean as needed.
Remove sections and vacuum or manually
remove debris as needed.
● Check and if necessary replace all
damaged parts or components.
● Do not operate with a damaged canister
filter - replace damaged filter immediately.
● Periodically inspect the power cord and
plug for damage. If necessary, replace the
power cord and plug at the first signs of
visible damage.
!