General International 15-855 M1 Setup & Operation Manual Download Page 3

English

3

150311

Warranty does not include failures, breakage or defects deemed after 

inspection by General

®

 International to have been directly or indirectly 

caused by or resulting from; improper use, or lack of or improper 

maintenance, misuse or abuse, negligence, accidents, damage in 

handling or transport, or normal wear and tear of any generally considered 

consumable parts or components.

Repairs made without the written consent of General

®

 International will 

void all warranty.

READ ALL INSTRUCTIONS  

BEFORE OPERATING

SAVE THESE INSTRUCTIONS

Before attempting to operate your new tool, please read these instructions 

thoroughly. You will need these instructions for the safety warnings, 

precautions, assembly, operation, maintenance procedures, parts list and 

diagrams. Keep your invoice with these instructions. Write the invoice 

number on the inside of front cover. Keep the instructions and invoice in a 

safe, dry place for future reference.

ThE wARNINGS, CAUTIONS AND INSTRUCTIONS 

discussed 

in this instruction manual cannot cover all possible conditions or 

situations that could occur. It must be understood by the operator that 

common sense and caution are factors which cannot be built into this 

product, but must be supplied by the operator.

IMPORTANT SAFETY 

INSTRUCTIONS

The purpose of safety symbols is to attract your attention to possible 

hazards. The safety symbols, and the explanations with them, deserve 

your careful attention and understanding. The safety warnings do not, by 

themselves, eliminate any danger. The instructions or warnings they give 

are not substitutes for proper accident prevention measures.

DANGER! 

Indicates an imminently hazardous situation which, if not 

avoided, will result in serious injury or death.

wARNING! 

Indicates an imminently hazardous situation which, if not 

avoided, could result in serious injury or death.

CAUTION: 

Indicates an imminently risky situation which, if not avoided, 

could result in minor injuries or slight injury. It may also be used to notify 

the user to remain alert regarding unsafe practises which may cause 

property damage.

Summary of Contents for 15-855 M1

































Reviews: