manualshive.com logo in svg

General Instrument DSR-4800 Series, Operating Manual

Share
Download
General Instrument DSR-4800 Series Operating Manual Download Page 13

The DSR-4800 Series

5

DSR-4800 Operating Manual

THE DSR-4850

The General Instrument DSR-4850 includes all features of the DSR-4800
with the following variance: An ASI input option has been installed in place
of the satellite QPSK tuner allowing the DSR-4850 to function as a decoder.

The DSR-4850 receives the MPEG-2 transport stream in DVB ASI format
through a BNC connector to an ASI input module. Once the ASI transport
stream is received either from a DSR-4800 or DSR-4810 unit, multiple DSR-
4850 units can be looped together.

DCII HD transport streams are processed to decrypt a service selected by the
user. The resulting transport stream is output in ASI format.

SD transport streams  are processed to extract, decrypt and decompress a
service selected by the user.

The DSR-4850 will use the Virtual Channel Tables from the UCS for tuning
between common services.

Summary of Contents for DSR-4800 Series




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands