the holes with a drop of thin CA.
4 Use the safety clips (buy separately) to secure the servo and servo
extension connected.
5 Put the servo into the servo hole, and mark the position for the screw to
fixup the servo. Pull the extension lead through to the root of the wing.
6 Drill holes for the servo mounting screws and harden the wood around
the holes with a drop of thin CA.
7 Install the control horn. Adjust the horn and servo arm. Fix the horn in
place firmly. Install the ball link and push rod . Make sure it’s firm and
flexible.
8 Repeat the previous steps for the other wing. Please install the wing
tube and wing bolts in the final assembly.
