General Hobby Piper J3, Assembly Manual

Page: 13 / 22


Cut out the holes on the elevator

Mount bottom wing to fuselage. Slide the stab through the pre cut
stab slot at the rear of the fuselage.

Center stab in fuselage

Align stab to wing. Ensure all dimensions are equal for both left and
right sides.

Make alignment marks on stab for easy realignment during the gluing
process.

Glue stab into fuselage. Be certain to put glue onto both the top and
bottom sides of the stab.

Double check all measurements are equal and stab is properly
positioned before glue dries.