18
3
BATTERY INFORMATION
Zinc-Air Battery Information
Your new Simply Soft uses a zinc-air #10 battery.
Peel off the paper activation tab prior to instal-
lation. To keep your device performing at peak
efficiency, use only premium zinc-air batteries.
Helpful hint #1.
Be sure NOT to remove the pull-
tab off the back of the battery until you are ready
to install it in the device. This will provide the
longest possible operating life. Do not store batter-
ies in the refrigerator.
Helpful hint #2.
Open the battery door to your device when not in use to
rest the battery and to allow any moisture build-up to escape.
Low Battery Alert:
Your Simply Soft digital device is equipped with a
Low Battery Warning system. The device will emit a beep (unrelated to a
memory change beep) when the battery is low on power. If the battery is
not changed within a short period of time after receiving the warning beep,
the device will shut off.
Remove activation tab
+
Curve 2, (memory 3)
Source .........................65.0 dB
Peak ............................15.3 dB
Peak Frequency ...........2,500 Hz
RMS Out .....................73.5 dB
Noise Reduction ..........0.0 dB
Curve 1 (memory 2)
Source .....................
65 dB
Peak ........................11.5 dB
Peak Frequency ..2,430.0 Hz
RMS Out .................69.8 dB
Noise Reduction ........0.0 dB
Composite (memory 1)
Source .....................65.0 dB
Peak ..........................7.5 dB
Peak Frequency ..2,600.0 Hz
RMS Out .................66.3 dB
Noise Reduction ........0.0 dB
Curve 3, (memory 4)
Source .....................65.0 dB
Peak ........................19.7 dB
Peak Frequency ..2,400.0 Hz
RMS Out .................77.8 dB
Noise Reduction ........0.0 dB
Curve 1
Curve 2
Curve 3
Curve 4
50
40
30
20
10
0
-10
-20
(dB)
SIMPLY SOFT PERFORMANCE DATA
