General Equipment EP8HL Operator'S Manual Download Page 5

EP8HL HAZARDOUS BLOWER
FORM GOM7069501, VERSION 1.2

3

Notice to Operators

IF  YOU  CAN  NOT  READ  OR  DO  NOT  FULLY  UNDERSTAND  THE  CONTENTS  OF
THIS  MANUAL,  PLEASE  CONTACT  THE  FACTORY  FOR  PROPER  ASSISTANCE
BEFORE ATTEMPTING TO OPERATE THIS PRODUCT.

SI  TU  NO  PUEDES  LE’ER  O  NO  COMPRENDES  EL  CONTENIDO  DE  ESTE  MANUAL
FAVOR  DE  PONERSE  EN  CONTACTO  CON  LA.  FABRICA  PARA  ASSISTENCIA-  A
PROPIA ANTES DE INTENTAR PARA OPERAR ESTE PRODUCTO.

SOLLTEN  SIE  DIESE  GEBRAUCHSANWEISUNG  NICHT  LESEN  KOENNEN  ODER
ES  NICHT  VOLLKOMMEN  VERSTEHEN,  WENDEN  SIE  SICH  BITTE  AN  DEN
HERSTELLER  FUER  RICHTIGE  HILFE  EHE  SIE  VERSUCHEN  DIESES  PRODUKT
ZU OPERIEREN.

SI  VOUS  NE  LISEZ  OU  NE  COMPRENDRE  ENTIEREMENT  LES  MATIERES  DE  CE
MANUEL,  S’IL  VOUS  PLAIT,  CONTACTEZ  L’USINE  POUR  L’ASSISTANCE
APPROPRIEE AVANT D’UTILISER LE PRODUIT.

These  safety  alert  symbols  identify  important  safety  messages  in  this  manual.  When  you  see  these
symbols, be alert to the possibility of personal injury and carefully read the message that follows.

Do  not  allow  anyone  to  operate  the  Blower  without  first  reading  this  Operator's  Manual  and  becoming
familiar  with  its  operation.  The  manufacturer  of  this  Blower  has  gone  to  great  extremes  to  provide  the
owner(s) and/or operator(s) with the finest equipment available for its intended job function of providing
air for portable ventilation purposes. Yet, the possibility exists that the Blower can be utilized in and/or
subjected to job applications not perceived and/or anticipated by the manufacturer. Such misuse and/or
misapplication of the Blower can lead to the possibility of serious damage, injury or even death. It is the
responsibility of  the  owner(s)  and/or  operator(s)  to  determine  that  the  Blower  is  being  utilized  and/or
operated  within  the  scope  of  its  intended  job  function.  It  is  the  responsibility  of  the  owner(s)  and/or
operator(s) to establish, monitor and constantly upgrade all safety programs and/or practices utilized in
and  for  the  operation  of  the  Blower.  The  purpose  of  such  programs  is  to  provide  for  owner(s')  and/or
operator(s')  safety.  Operators  must  be  instructed  to  recognize  and  avoid  unsafe  conditions  associated
with their work (29 CFR 1926.21 (b)(2)) and/or applicable updated revisions. It is the responsibility of the
owner(s) and/or operator(s) to determine that no modifications and/or alterations have been made to the
Blower.  Modifications  and/or  alterations  can  lead  to  the  possibility  of  serious  damage,  injury  or  even
death. It is the responsibility of the owner(s) and/or operator(s) to make this Operator's Manual available
for consultation during all phases of operation. Refer to OSHA 2207 and/or applicable updated revisions
which  contains  all  OSHA  job  safety  and  health  rules  and  regulations  (1926  and  1910)  covering
construction.

The concept of portable air ventilation blowers has been successfully utilized for many years as a practical
solution to many types of air ventilation job requirements. The basic concept is proven and well accepted
within the associated marketplaces. Use of a Blower requires strenuous work activity. This type of work

Summary of Contents for EP8HL






















































Reviews: