Engineered Options
CONTROL SYSTEM
Rating Definitions
Configurable Options
ENGINE SYSTEM
Coolant heater ball valves
Fluid containment pans
ALTERNATOR SYSTEM
3rd Breaker Systems
GENERATOR SET
Special Testing
Battery Box
ENCLOSURE
Motorized Dampers
Enclosure Ambient Heaters
Door Alarm Switch
CONTROL SYSTEM
Spare inputs (x4) / outputs (x4) - H Panel
Only
Battery Disconnect Switch
ENGINE SYSTEM
General
Engine Block Heater with ball valves
Flexible Fuel Line - NPT Connection
Oil Heater
Air Filter Restriction Indicator
Stone Guard (Open Set Only)
Engine Electrical System
10A UL battery charger
Battery Warmer
ALTERNATOR SYSTEM
Alternator Upsizing
Anti-Condensation Heater
Tropical coating (480/600 V non-upsized
only)
GENERATOR SET
Gen-Link Communications Software (English
Only)
Extended Factory Testing (3 Phase Only)
8 Position Load Center
2 Year Extended Warranty
5 Year Warranty
5 Year Extended Warranty
CIRCUIT BREAKER OPTIONS
Main Line Circuit Breaker
2nd Main Line Circuit Breaker
Shunt Trip and Auxiliary Contact
Electronic Trip Breakers
ENCLOSURE
Standard Enclosure
Level 1 Sound Attenuation
Level 2 Sound Attenuation
Steel Enclosure
Aluminum Enclosure
180 MPH Wind Kit
12 VDC Enclosure Lighting Kit
120 VAC Enclosure Lighting Kit
AC/DC Enclosure Lighting Kit
21-Light Remote Annunciator
Remote Relay Panel (8 or 16)
Oil Temperature Sender with Indication Alarm
Remote E-Stop (Break Glass-Type, Surface
Mount)
Remote E-Stop (Red Mushroom-Type,
Surface Mount)
Remote E-Stop (Red Mushroom-Type, Flush
Mount)
Remote Communication - Modem
Remote Communication - Ethernet
10A Run Relay
Ground fault indication and protection func-
tions
Standby –
Applicable for a varying emergency load for the duration of a utility power outage with no overload capability.
Prime –
Applicable for supplying power to a varying load in lieu of utility for an unlimited amount of running time. A 10% overload capacity is available for 1 out of
every 12 hours. The Prime Power option is only available on International applications.
Power ratings in accordance with ISO 8528-1, Second Edition dated 2005-06-01, definitions for Prime Power (PRP) and Emergency Standby Power (ESP)
.
SG400
SG400 400 kW
