Generac Power Systems MAGNUM MTT20IF4, Operating Manual

Page: 32 / 52

32
This table lists the parameters needed to schedule an event and to adjust the clock within the controller.
Note: If parameter 902 is “0”, then the auto exercise timer is enabled and if it is “1”, then the autolight timer is enabled.
Parameter Description Details
Configuration Parameters - Scheduler
901 Enable Scheduler On (1), Off (0)
902 Schedule Run On or Off Load On (1), Off (0)
903 Schedule Period Weekly (0), Monthly (1)
904 Scheduler (1) Start Time 0:00:00
905 Scheduler (1) Start Day 0 (1=Monday)
906 Scheduler (1) Start Week 1,2,3,4
907 Scheduler (1) Duration 0:00:00
908 Scheduler (2) Start Time 0:00:00
909 Scheduler (2) Start Day 0 (1=Monday)
910 Scheduler (2) Start Week 1,2,3,4
911 Scheduler (2) Duration 0:00:00
912 Scheduler (3) Start Time 0:00:00
913 Scheduler (3) Start Day 0 (1=Monday)
914 Scheduler (3) Start Week 1,2,3,4
915 Scheduler (3) Duration 0:00:00
916 Scheduler (4) Start Time 0:00:00
917 Scheduler (4) Start Day 0 (1=Monday)
918 Scheduler (4) Start Week 1,2,3,4
919 Scheduler (4) Duration 0:00:00
920 Scheduler (5) Start Time 0:00:00
921 Scheduler (5) Start Day 0 (1=Monday)
922 Scheduler (5) Start Week 1,2,3,4
923 Scheduler (5) Duration 0:00:00
924 Scheduler (6) Start Time 0:00:00
925 Scheduler (6) Start Day 0 (1=Monday)
926 Scheduler (6) Start Week 1,2,3,4
927 Scheduler (6) Duration 0:00:00
928 Scheduler (7) Start Time 0:00:00
929 Scheduler (7) Start Day 0 (1=Monday)
930 Scheduler (7) Start Week 1,2,3,4
931 Scheduler (7) Duration 0:00:00
932 Scheduler (8) Start Time 0:00:00
933 Scheduler (8) Start Day 0 (1=Monday)
934 Scheduler (8) Start Week 1,2,3,4
935 Scheduler (8) Duration 0:00:00
Configuration Parameters - Time and Date
1001 Time of Day 0:00:00
1002 Day of Month 1-31
1003 Month of Year 1-12
1004 Year 0-99