Operation
22
MDG20IF4-MLG20IF4 Operating Manual
37100 B
1. With the Scheduler on, press
↓
to enter the scheduler starting with Monday.
Figure 20 - Monday Scheduler
a. To edit the day, use
↑
or
↓
to get to the desired day. Press
to turn the day on or off.
b. The start time and duration are adjusted whenever the number set is highlighted. Use
↑
or
↓
to change the
value.
Note:
The duration can only be set in five minute intervals.
Set the Unit to Auto Mode
1. From the Home screen, press
to toggle to Auto mode.
Figure 21 - Home Screen (Auto Mode Shown)
Note:
If any of the scheduled time slots are currently active, the controller will begin the starting sequence and start
the unit provided there are no shutdown conditions present.
SHUTTING DOWN THE UNIT
Check with personnel using power supplied by the unit and let them know the power is going to be turned off. Make
sure the power shut down will not create any hazards by accidentally turning off equipment that needs to be kept
on (pumps, compressors, lights, etc.).
1. Remove all loads from the receptacles.
2. Switch the main circuit breaker to the OFF (O) position.
3. Press the Stop (O) button.
4. After the unit shuts down, move the Control Power switch to the OFF (O) position.
Note:
For extended storage time, disconnect the battery. For extended storage requirements, refer to the engine
operator’s manual.
08/28/2015 12 29PM
MONDAY
MONDAY
OFF
OFF
START
START
09 36 PM
DURATION
DURATION
10hrs
00mins
PRESS SELECT TO EDIT
02015
AUTO
AUTO
MANUAL
MANUAL
HRS 2 hr
SRV 7 hr
STATUS At Rest
01969
Discount-Equipment.com
