Generac Power Systems GTH1000, Service Manual, Page: 36 / 74

SECTION 5: CYLINDER HEAD AND VALVES
5-6
6. Install rotating screen.
a. Torque screws to 1.9 Nm (17 in. lbs).
7. Install finger guard.
a. If engine is equipped with hex head screws, torque screws to
4.5 Nm (40 in. lbs).
b. If engine is equipped with finger screws, tighten screws by hand
to approximately 1.3 Nm (12 in. lbs.).
8. Assemble air cleaner.
9. Make Static and Dynamic Governor adjustments as outlined on
Page 4-3.
1
2
5
7
6
3
4
1
2
3
4
5
6
7
8
8
VALVE COVER
LOWER WRAPPER
UPPER WRAPPER
BLOWER HOUSING
OIL COOLER
INTAKE MANIFOLD
ASSEMBLY
ROTATING SCREEN
FINGER GUARD
Figure 5-18. General Assembly