2 of 2
30 AMP and 50 AMP KITS
Generac Power Systems, Inc. • P.O. Box 8, Waukesha, WI 53187 • generac.com
©2012 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0195040SBY-D / Printed in U.S.A. 09/24/12
®
30 AMP Pre-wired
30 AMP
50 AMP
Model #
6294
6408
6295
6296
Circuits Provided
6
6
10
12
Max # Circuits
10
10
16
16
Max Amps @ 240V
30 Amp
30 Amp
30 Amp
50 Amp
Included Breakers
2 - 15 Amp 1-pole
2 - 20 Amp 1-pole
1 - 20 Amp 2-pole
2 - 15 Amp 1-pole
2 - 20 Amp 1-pole
1 - 20 Amp 2-pole
3 - 15 Amp 1-pole
3 - 20 Amp 1-pole
1 - 20 Amp 2-pole
1 - 30 Amp 2-pole
3 - 15 Amp 1-pole
3 - 20 Amp 1-pole
1 - 20 Amp 2-pole
1 - 30 Amp 2-pole
1 - 50 Amp 2-pole
Required Main Breaker in
Load Center
(provided by installer)
60 Amp 2-pole
60 Amp 2-pole
60 Amp 2-pole
100 Amp 2-pole
Male Inlet Configuration
Power Inlet Box
L14-30
NEMA 3R
L14-30
NEMA 3R
L14-30
NEMA 3R
CS6365
NEMA 3R
Switch Enclosure Type
NEMA 1
NEMA 1
NEMA 1
NEMA 1
Switch Dimensions
9-1/4
"
W x 11-1/8
"
H x 3-3/8
"
D
9-1/4
"
W x 11-1/8
"
H x 3-3/8
"
D
14-3/8
"
W x 11-1/2
"
H x 3-3/8
"
D 14-3/8
"
W x 11-1/2
"
H x 3-3/8
"
D
Shipping Dimensions
16
"
W x 14
"
H x 7
"
H
16
"
W x 14
"
H x 7
"
H
16
"
W x 14
"
H x 12
"
H
16
"
W x 14
"
H x 12
"
H
Shipping Weight (lbs).
19
20
32
36
UPC codes
696471062946
696471064087
696471062953
696471062960
Kit Contents
•
Transfer Switch:
30 Amp for
surface mounting
•
Cord:
10
'
10/4 with L14-30 ends
•
Power Inlet Box:
30 Amp resin
(must be hardwired)
• Install manual, wiring harness,
conduit and fittings, wire
connectors
•
Transfer Switch:
30 Amp for
surface mounting
•
Cord:
10
'
10/4 with L14-30 ends
•
Power Inlet Box:
30 Amp
aluminum (must be hardwired)
• Install manual, wiring harness,
conduit and fittings, wire
connectors, 20 Amp L14-20 plug
•
Transfer Switch:
30 Amp for
flush or surface mounting
•
Cord:
10
'
10/4 with L14-30
male and female ends
•
Power Inlet Box:
30 Amp
aluminum (must be hardwired)
• Install manual, wiring harness,
conduit and fittings, wire
connectors
•
Transfer Switch:
50 Amp for
flush or surface mounting
•
Cord:
10
'
6/4 with 14-50 male
and CS6364 50 Amp locking
female
• Power Inlet Box:
50 Amp
aluminium (must be hard wired)
• Install manual, wiring harness,
conduit and fittings, wire
connectors
Compatible With
For use with generators equipped with
30 Amp outlets such as:
For use with generators equipped
with 50 Amp outlets such as:
GP5500, GP6500E, GP7500E,
XG6500, XG7000E, XG8000E,
XP6500E, XP8000E
GP3250, LP3250, XG4000, XP4000,
GP5500, GP6500E, GP7500E,
XG6500, XG7000E, XG8000E,
XP6500E, XP8000E
GP5500, GP6500E, GP7500E,
XG6500, XG7000E, XG8000E,
XP6500E, XP8000E
GP15000E
GP17500E
XG10000E
30 Amp Switch Neutral Kit - Model 6297
Kit Contents
*Enables manual transfer switches to isolate the utility and generator neutrals.
*Mounts inside the switch
• Prewired Contactor, UL listed
• Wire Harness
• Wire Connectors (3)
• Insulated 8-position terminal block
• For use with 30 Amp Manual Transfer Switches
NOTE: XP units require the 30 Amp Switch Neutral Kit - Model 6297
Manual Transfer Switch Kits
